FAQs

Low water pressure in your home can result from a variety of issues. Common causes include:

Clogged Pipes or Fixtures: Mineral buildup in pipes, faucet aerators, or showerheads can restrict water flow, especially in older plumbing systems.

Leaks in the Plumbing: Undetected leaks can reduce water pressure and may also lead to water damage. Check for damp spots, mold, or unusually high water bills.

Partially Closed Valves: Ensure your main shutoff valve, water meter valve, and individual fixture valves are fully open.

Faulty Pressure Regulator: If your home has a pressure-reducing valve (PRV), it may need adjustment or replacement if it’s malfunctioning.

Issues with the Municipal Water Supply: Sometimes the problem originates from the city or utility provider due to maintenance, demand surges, or supply issues.

Corroded Pipes: Older galvanized steel pipes can corrode internally, gradually reducing water flow.

High Demand or Shared Lines: Pressure may drop during peak usage times or if multiple homes share the same water supply line.

A constantly running toilet is usually a sign of an internal component that isn’t functioning properly. Common causes include:

Worn Flapper: The rubber flapper at the bottom of the tank may not be sealing correctly, allowing water to leak into the bowl. This is the most frequent cause and is usually easy to replace.

Faulty Fill Valve: If the fill valve doesn’t shut off properly, it can continue to let water into the tank, causing constant refilling.

Float Issues: If the float is set too high or is malfunctioning, the tank may overfill, and water will continuously drain through the overflow tube.

Chain Problems: A chain that’s too short or tangled can prevent the flapper from closing fully, while a chain that’s too long may get caught under the flapper.

Cracked or Misaligned Overflow Tube: If the overflow tube is damaged or not correctly positioned, it may cause water to drain unnecessarily.

HVAC stands for Heating, Ventilation, and Air Conditioning. It refers to the systems used to regulate the temperature, air quality, and comfort within residential and commercial buildings.

Why HVAC is Important:
Comfort Control: HVAC systems maintain a comfortable indoor environment by providing heating in the winter and cooling in the summer.

Air Quality: Proper ventilation helps remove indoor pollutants, allergens, and excess moisture, improving the overall health and safety of indoor air.

Energy Efficiency: Modern HVAC systems are designed to operate efficiently, reducing energy consumption and lowering utility bills.

Climate Control for Equipment: In commercial settings, HVAC helps protect equipment, servers, and inventory that require stable temperatures and humidity levels.

Health & Safety: HVAC systems help prevent the growth of mold and mildew by controlling humidity, and filtration systems can reduce airborne bacteria and viruses.

Maintaining your HVAC system with regular inspections and filter changes ensures it continues to operate efficiently and reliably year-round.

If your HVAC system isn’t keeping your home at the desired temperature, there could be several potential causes. Here are the most common reasons:

Dirty Air Filters: A clogged or dirty filter can restrict airflow, making it difficult for the system to heat or cool effectively. This is one of the simplest and most common issues.

Thermostat Problems: Incorrect settings, dead batteries, or a malfunctioning thermostat can prevent the system from operating properly.

Refrigerant Issues (Cooling): Low or leaking refrigerant in an air conditioning system can reduce cooling performance and may indicate a bigger problem.

Pilot Light or Ignition Issues (Heating): In gas heating systems, problems with the ignition system can prevent the furnace from heating correctly.

Blocked or Leaky Ductwork: Damaged or obstructed air ducts can cause uneven temperatures or reduce overall airflow throughout your home.

Frozen Evaporator Coils: Ice buildup on the coils can result from poor airflow or refrigerant issues and will reduce cooling capacity.

Electrical or Mechanical Failures: Faulty capacitors, motors, or circuit breakers can interrupt the normal function of the HVAC unit.

If your system isn’t heating or cooling properly, it’s best to start by checking your thermostat, air filter, and circuit breakers. If the issue persists, it may require professional diagnosis and repair.

The right HVAC unit size depends on your home’s square footage, insulation, layout, window types, and local climate. As a general rule, you’ll need about 20 BTUs per square foot, but this can vary.

Getting the size right is important—a unit that’s too small won’t keep up, and one that’s too large can waste energy and cause uneven temperatures. For the most accurate recommendation, a licensed HVAC professional can perform a Manual J Load Calculation tailored to your home.